Top

 Dual PowerLab 8x2 with EC5 input cable and BUMP Controller

Details

Charger:
Independent channel operation1344W per channel, 2688W total using 40V input. Intuitive PowerLab interface. Designed with built in PowerLab reliability and quality. Extended input voltage range (10V-48V). Independent cables so you can power each channel with a separate power supply to attain maximum power from each channel even when using 110VAC, 15A AC circuits. Battery Workstation including an EC5-equipped input cable, will charge, discharge, monitor, or multiple cycle any current or future battery chemistry.
Bump Controller:

BUMP is an exclusive new Revolectrix concept for Battery Management.
The BUMP Controller utilizes Near Field Communication (NFC) Technology to communicate with any battery equipped with a BUMP Compliant Tag, or “BumpTag”.
The BumpTags will be pre-installed and pre-configured on most Revolectrix batteries in the near future.
BumpTags will also be available for sale separately, so a customer can configure them for use with any battery of his choosing using the BUMP Controller
. Once a tag is programmed for any given battery, a simple “BUMP” of the battery on the BUMP Controller configures any Revolectrix PowerLab Battery Workstation to the ideal settings for performing all battery management tasks.
The BUMP Controller can independently address up to 4 PowerLab units (or channels of the Dual PowerLab 8) – each PowerLab connected is able to operate completely independent of the others.
The Bump Controller requires a separate power source to operate.

Reviews

Q & A