NEUTRONICS 8012 F3A (Pattern) 16 pole outrunner motor 205 KV
Brand new to the world of F3A 2019
Our new 8012 F3A motor is intended to power the standard size of 10 cell F3A models.
It weighs only 615 grams. The motor is 94mm in diameter and 55mm in length.
16 Pole Outrunner.
The shaft is 8mm and made of titanium.
Kv is 205, no-load current .9 amps and resistance is 0.021 ohms. Diameter: 94MM
Features a built-in cooling fan.
The 8mm collet adapter is included with the motor.
The motors now feature a 5mm stub shaft on the to allow use of a bearing for rear support. The stub is 8mm in length.
Uses standard sized props for a 2-meter pattern plane like the 21x13
Uses ESC's like the Graupner HV80, Castle HV80, Castle 120HV, or the myriad of Jeti ESC's sold here above 85 AMPS.
Rear mount support requires a 5MM bearing using a support on the back.
From Steve Neu:
The 8012 F3A is based on the 80X series motors that have been out for a couple of years.
We redesigned the mechanical components to reduce weight while retaining the strength that the 80XX motors are known for.