The Cessna S 30-50E ARF was designed by the 15 times Italian Champion Sebastiano Silvestri, vice-European Champion and 2-time F.A.I World Cup winner F3A. This professional ARF kit is the result of 30 years of model airplane design experience.

This combined with an extremely light weight structure and with many small aerodynamical tricks give the Cessna S 30-50E an impressive precision and easy control in any flight condition. The Cessna S 30-50E can do it all! It can fly very stable and easily at any airspeed: a dream for every beginner.

In expert hands it can perform very easy reverse flight, hover, positive harrier, knife edge, and almost anything else you can dream up.

Specifications:

Wing Span:………………...……............................65”/166 cm Length:….......…….……………..........................…57.8” /147 cm

Wing Area:…….......................................................42 dm2

Weight:…………………….…….….2.500g./ 2.900g

RTF Radio:.............. 6+ channels with 5 MG digital mini servos

Weight RTF (with 5000-5S): 2.900g

Recommended power set up elec. motor: E-Flite Power 60 Brushless Outrunner Motor, 400Kv (EFLM4060A)

ESC: Castle Phoenix Edge 75 amp ESC, 8S / 33.6 volt with 5 amp BEC

 Lipo:

Power Unlimited 5S 5100 HV Lipo Battery Pack

APC 16x8E Prop

Weight RTF (with 5000-5S): 2.900g

Required:

6+ channel radio system

5 mini MG digital servos for ailerons, elevator, rudder and steering

2 servo extension 500mm for elevator and rudder servos

2 servo extension 250mm for aileron servos

Additional required item, tools and adhesives Tools: • Drill • Drill bits: 1,5mm • Phillips screwdriver • Hobby knife • Sanding paper • Masking tape • Soldering iron Adhesives: • thin CA • medium CA